Selfguard Automation & Controls offers a range of Generator Control Panel and Auto Start Auto Stop Units with Remote designed for self-start generators and compatible with key-start and controller-based models. These systems are available in multiple variants such as single-phase and three-phase models, while the core working remains similar, though features may vary depending on the model.
Working of Generator Control Panels with Remote
The generator control panels are designed to support remote start/stop along with automatic and manual start/stop operation.
In auto mode, the generator starts automatically when the main supply is not available and stops automatically when the main supply returns.
In manual mode, the generator can be started using the start button and stopped using the stop button from either the main unit or the remote unit. Even in manual mode, the generator stops automatically when the main supply becomes available.
These panels are designed as safety systems that cover both the engine and the alternator during operation.
Wired Remote Generator Control Panels
In wired remote systems, the remote unit is connected to the main control unit using a wire. The remote operates through a 4-core wire connection, and it operates through a 4-core wire connection, with distance depending on installation setup.
With the wired remote, the user can start and stop the generator and also change between auto and manual modes from the remote unit itself. The working of the generator in both auto and manual modes remains the same as defined in the system.
Wireless Remote Generator Control Panels
In wireless remote systems, the remote unit operates without any physical wire connection. The wireless remote provided with the unit can be operated from a distance of up to 300 feet from the generator.
Using the wireless remote, the generator can be started and stopped, and the operating mode can be changed between auto and manual directly from the remote.The operational logic and safety features remain similar across models.
Display and Protection Features
The control panels include a 20×4 LCD display that shows the status, warnings, and faults of the engine and alternator while the generator is running.
The display provides information such as battery voltage, engine run time, service due time, voltage, frequency, RPM, current, oil pressure, temperature, fuel level, and mains voltage.
The system also includes warning and tripping features such as low or high battery, service due indication, over and under voltage, over and under RPM, over and under frequency, overcurrent trip, and low oil pressure.
Difference Between Wired and Wireless Remote
The primary difference between wired and wireless generator control panels lies in the method of remote operation. Wired systems use a physical 4-core wire connection and can operate over long distances depending on the wiring, while wireless systems operate without wires and can be used up to approximately 300 feet.
All other functions, including auto start, auto stop, remote operation, display, and safety features, remain the same in both systems.
Conclusion
Selfguard Automation & Controls provides generator control panels with both wired and wireless remote options, while maintaining similar working, functions, and safety features across both types, depending on the model.
The selection between wired and wireless depends only on the method of connection, as both systems are designed to control and protect the generator with automatic and remote operation, with differences mainly in remote connectivity.