Difference Between Automatic Changeover Cum Phase Changer vs Automatic Phase Changer
In the realm of electrical systems, maintaining a consistent and dependable power supply is critical. Various equipment and technologies contribute to reaching this goal, with the Automatic Changeover Cum Phase Changer and the Automatic Phase Changer being two popular examples. In this blog, we will look at the fundamental differences between the two, throwing light on their roles and applications in simple terms.
Automatic changeover cum phase changer
The Automatic Changeover cum Phase Changer can only be fitted on a three-phase power supply. Automatic Changeover cum The term "phase changer" refers to the combination of Automatic Change Over and Phase Change Over Switch. It automatically transfers load from the mains to the generator and from the generator to the mains, as well as automatically providing output for all three phases if one or two phases are missing, and it immediately diverts to the originating phase if all three phases have returned or are present.
Automatic Phase Changer
The Automatic Phase Changer can only be installed with a three-phase supply. Automatic phase changers are selected based on the main load. It ranges from 63 to 200 amps. The automatic phase changer's size varies according to the load capacity. This product automatically outputs all three phases if one or two are missing, and it returns or presents all three phases before automatically diverting to its originating phase.
Applications
Automatic changeover cum phase changer:
It is only relevant to three-phase main supplies and single-phase loads such as lights, fans, single-phase alternating current, and single-phase motors.
Automatic Phase Changer:
It is only relevant to three-phase main supplies and single-phase loads such as lights, fans, single-phase alternating current, and single-phase motors.
CONCLUSION
In Conclusion, the choice between an Automatic Changeover Cum Phase Changer and an Automatic Phase Changer is determined by the electrical system's specific requirements. If both automated source switching and phase stability are required, an automated Changeover Cum Phase Changer is the better option. However, if the primary objective is to address phase-related issues without the necessity for automatic switching, an Automatic Phase Changer is a better choice. We at Selfguard are committed to supplying you with excellent products like automatic phase sequence corrector, and automatic changeover switches, to save you time and money.
Read more about the Five Things To Consider Before Purchasing A Water Level Controller.